info@shxvalve.com

contact us

SHANGHAI HUIXUAN VALVE

Tel:+86-17717520739

Email:info@shxvalve.com

Address: NO.720, Suide Road, Jiading District,Shanghai, China.
 

Stainless steel electric ball valve

Model:Q941F Q941H Q941Y

  • Port size:DN15~300, NPS 1/2〞~ 12〞
  • Pressure:PN16 ~ 100,150LB ~ 600LB
  • Medium:Water,oil,steam,gas
  • Temperature :soft seal -40℃ ~ 150 ℃;hard seal -40℃ ~ 450℃
  • Body material:WCB CF8 CF3 CF8M CF3M or others
  • Connection:Flange
  • Position type:On-off type or adjusting type
  • Characteristic:Full bore/Reduced ball
  • Voltage:AC110V, AC220V, AC380V
  • Other:compact actuator
Stainless steel electric ball valve introduction:
Stainless steel electric ball valve is composed of electric actuator and stainless steel hard seated or soft seated ball valve, through the actuator input related power signal to control the valve opening and closing, Stainless steel electric ball valve usually used in the pipeline medium of the switch two cuts, or control the valve rotation open to achieve proportional adjustment.Stainless steel electric ball valve has the advantages of high temperature, wear resistance, high pressure resistance, corrosion resistance, not crack.The user can choose the manual control function according to the actual situation, in case of power failure or failure of the electric device, you can manually control the switch of the electric ball valve, so as to ensure the normal operation of the working condition.
 
Stainless steel electric ball valve application:
Stainless steel electric hard seal ball valve not only widely used in general industrial pipeline, and the working condition of high temperature and high pressure or corrosive medium and cryogenic temperature to -196 ℃ or less and working conditions of serious places has been widely used, high strength, excellent heat resistance and corrosion resistance, Stainless steel electric ball valve widely used in petroleum, petrochemical, chemical, metallurgy, electric power, steel, water conservancy, urban construction, machinery, coal and other industries
 
Stainless steel electric ball valve Technical parameters :
Nominal size: DN15 ~ DN300(mm)
Nominal pressure: PN16 ~ 100,150LB ~ 600LB
Connection mode: flange connection
Valve body form: 2 Pcs or 3 Pcs valve body
Supply voltage:AC110V, AC220V, AC380V (other customized DC24, etc.)
Power driven:(explosion-proof, with manual device)
Temperature range:soft seal -40℃ ~ 150 ℃;hard seal -40℃ ~ 450℃
Body material: stainless steel 304, 316, 316L or others
Control mode: switch type (switch off control), control type (4-20ma analog signal)
Suitable medium:water, steam, oil, environmental protection, gas, coal, etc. (high temperature, high pressure, low temperature, corrosive medium)

INQUIRY US

微信扫一扫

添加我为好友了解更多