info@shxvalve.comTel:+86-17717520739


Email:info@shxvalve.com
Address: NO.720, Suide Road, Jiading District,Shanghai, China.
 


Model:
| Pneumatic control valve Body type:  | 
	straight through casting globe type | 
| Spool type: | non-balanced single seat plug type | 
| Nominal size: | DN15~25,、 NPS 1/2〞~ 1〞 | 
| Nominal pressure: | PN16 ~ 320、 CLASS 150LB ~ 1500LB | 
| Connection: flange: | FF、RF、MF、RTJ | 
| Welding: | SW、BW | 
| Flange dimension: | According to to IEC 60534 | 
| Pneumatic small flow control regulating valve Bonnet type: | Ⅰ:standard type(-20℃~230℃) Ⅱ:Radiator type: (-45℃~ high than 230℃ occasion) Ⅲ:Low temperature extended type(-196℃~ -45℃) Ⅳ:Bellow seal type Ⅴ:Warm insulation Jacket type  | 
	
| Packing: | V type PFTE packing, flex. graphite packing, etc. | 
| Gasket: | Metal graphite packing | 
| Pneumatic control valve actuator: | Pneumatic: multi-spring diaphragm actuator, piston type actuator. | 
| Pneumatic small flow control regulating valve Flow characteristic  | 
	Linear, percentage, quick open | |
| Allowable range | 30: 1 | |
| Rated Cv value | CV 0.01-1.0 | |
| Pneumatic control valve Allowable leakage | Metal seal:  IV grade(0.01% rated capacity) Leakage standard: GB/T 4213  | 
	|
| Pneumatic small flow control regulating valve Performance | ||
| Intrinsic error % | ±1.5 | |
| Return difference, % | ≤1.5 | |
| Dead zone, % | ≤0.6 | |
| Difference from beginning to end point, % | ±2.5 | |
| Rated travel difference, % | ≤2.5 | |
